Custom Metal distributes sliding door hardware such as track, trolleys, brackets, collars, blinds, door stops, rollers, latches, handles, frames, rails, and others.
Slotted Round Track:
Brackets sold seperately for single and double track runs
8’, 10‘, 12’, 14‘, 16’, 18‘, 20’ 24’
9” Cam Action Bolt T-Trolley
A 1/2” x 9” offset bolt adjusts easily and uses a girt clip. Generous vertical adjustment accommodates a variety of door materials.
Round-up Flashing bracket taps in with hammer. For 1 1/2” Doors
Top Mount Brackets
This slide-on bracket top mounts
Face Mount Brackets
This slide-on bracket face-mounts to the building
Double Round Track Bracket
Wall mounted, and used at 12” to 18” intervals to bring double runs of track to the side of the building for by-pass installation.
Track splice collar used to connect separate pieces of track tube
End blind with Mounting Bolt.
For 2” doors, made from rugged zinc-plated steel and ribbed to increase strength. Holes accept 5/16” bolts or lag screws (not included).
Wall mounted. Adjustable for doors 1-1/4” to 2-5/8” thick. Reversible, 2” non-marking plastic wheel. Frame is 3/16” zinc plated steel, 1-1/4” wide x 4-1/2” long.
Ring and hook simply secure a chain to desiered length for holding bi-parting sliding door together. Designed for use with clad wood-frame doors.
The 7” Jamb latch/snugger is used on the inside of jamb to secure sliding doors, and can be used for either right or left hand applications. The strike plate is lumber-fit for easy installation.
Heavy duty deluxe cane bolt has zinc plated 5/8” diameter rod, 24” in length. Fancy mounting brackets and screws included.
Extra heavy construction for use with heavy doors. With a 7-7/8” over-all length, 2” wide, 7/16” holes. Formed 1-3/4” deep to allow easy use, even with gloved hand. Zinc plated and white powder coated finish available.
White Aluminum Quick Frame
Is lumber fit for standard 2 x 4 or 2 x 6 and provides smooth, safe sides for door openings.
8’, 10’, 12’, 14’, 16’
White Aluminum Bottom Rail
Mounts on face of wood bottom rail and provides a smooth surface for a stay roller.
8’, 10’, 12’, 14’, 16’, 18’, 20’
Bottom Guide Rail
Fabricated from 16 gauge galvanized steel and mounts with #60 brackets. Engages the bottom door guides to hold the door in place and prevent wind damage.
4’, 6’, 8’, 10’
White Aluminum H-Frame
Designed for use with bi-parting doors, provides concealed mating between units covering both door edges. Packaged in pieces, bundled per order.
8’, 10’, 12’, 14’, 16’
These installation instructions are intended to offer general guidelines and recommendations for installing our steel roofing, siding and trim components and related metal building accessories. Certain conditions and circumstances may require additional steps and procedures during the installation process to insure the safe and efficient installation of our products. Read all instructions thoroughly before beginning any installation. Contact a Custom Metal representative if you have any questions regarding these instructions or the installation of our metal building components. View PDF